Mejor Servidor 24/7 eficiente for Polonia
Un servidor siempre encendido, ajustado para consumo mínimo, que ejecuta Docker y servicios de domótica. Prices and availability for Polonia.
La solicitud
- Docker · 2 usuarios
- Home Assistant
- Copia de seguridad
- Silencioso
- Bajo consumo
Resumen · Efficiency build≈ €941
Requisitos vs este build
necesario · usado| Hilos de CPU | 6 | 100% | Lleno |
|---|---|---|---|
| RAM | 24 GB | 75% | OK |
| Almacenamiento | 5 TB | 75% | OK |
| GPU | No necesaria |
Consumo
- Uso
- 24/7
- Reposo
- 32 W
- Típico
- 40 W
- Pico
- 100 W
- Energía / año
- ≈ €63
- En 3 años
- ≈ €188
Puntuación
General81
Rendimiento75
Eficiencia76
Valor93
Por qué esta variante
Elígela si
Idles around 32W — the cheapest to run of the generated variants, day and night.
Lo que sacrifica
- Trades compute headroom for a lower power bill — heavy bursts run slower.
Cómo se eligieron las piezas
- AMD Ryzen 5 5600GT: 6 cores / 12 threads covers the 6 cores needed with headroom.
- Motherboard AMD B550 (AM4): matches the CPU socket and case size.
- RAM: 32GB DDR4 — meets the 24GB the workload requires.
Por qué no las demás
- Efficiency build — lowest energy beats "Smart build — best all-round" on performance -15, expandability +28, longevity +10 — that is why it is recommended for your priorities.
- Efficiency build — lowest energy beats "Value build — most for your money" on efficiency +6, silence +23 — that is why it is recommended for your priorities.
Antes de comprar
4 críticosCrítico
Check the balance
System idles ~32W vs maxIdlePowerW=30W requested (CPU ~10W + drives/fans). Closest efficient option shown — lower the workload or raise the cap for full compliance.
Crítico
Check the balance
This build may struggle with the stated workload.
Crítico
No storage redundancy
2 drive(s) with no mirror or parity for the data you plan to store.
€171
€72
€62
€27
€8
psuSeaSonic Platinum Fanless ATX 400W Fully Modular 80+ Platinum400 W · platinum · modularAlternativas y cambio≈ €74
storageWestern Digital WD Blue SN5000 4TB SSD M.2-2280 PCIe 4.0 x4 NVMeNVME · 4 TBAlternativas y cambio€414
€76
€37
Reposo
32W
Típico
40W
Pico
100W
Energía / año
≈ €63
Rendimiento75
Valor93
Eficiencia76
Ampliabilidad100
Silencio73
Longevidad90
Fiabilidad75
Global81
Puntuación de solidez futura
Solidez futura sólida81/100
Strong future-proofing (81/100) — this build should stay relevant for years without major surgery.
Upgrade path75
DIY build — the CPU, motherboard and PSU can each be upgraded independently without replacing the whole system.
Expansion100
Expansion headroom: 1 PCIe slot(s), 1 M.2, 63 SATA, 0 drive bay(s), 2 RAM slot(s) free.
Storage growth90
Storage is 75% utilized with 0 free drive bay(s) and 63 free SATA port(s).
Memory growth75
2 RAM slot(s) free; memory is 75% utilized.
Networking80
Networking is 2500 Mbps, and a free PCIe slot can add a faster NIC later.
Replacement ease80
MATX form factor with standard, socketed components — most parts are easy to replace.
Workload change70
No GPU, but there is room (1 PCIe slot(s), PSU headroom 4x) to add one for AI/transcoding.
Homelab Risk Score
Riesgo moderado41/100
Moderate risk (41/100) — a few items are worth fixing before you commit (see checklist).
high
Single point of failure
Storage has no redundancy (2 drives, no mirror/parity) — a single drive failure exposes the array.Solución: Add at least a mirror (RAID 1/ZFS mirror) for irreplaceable data, or an additional parity drive for larger arrays.
medium
Storage risk
1 desktop hard drive(s) — not rated for 24/7 duty, vibration or heat; higher long-run failure risk.Solución: For an always-on system, prefer NAS/CMR-rated drives; monitor SMART and replace before the warranty ends.
critical
Data loss risk
2 drive(s), no redundancy, hard-drive media — the worst combination for keeping data safe.Solución: Add redundancy and an off-site/off-box backup for anything irreplaceable.
low
Power risk
PSU is 400W, peak load 100W (25%).Solución: PSU sizing leaves healthy headroom for spikes and future parts.
low
Network risk
Single 2500 Mbps NIC — a switch/port failure takes the box fully offline, and multi-user media can saturate 2500 Mbps.Solución: Consider a second NIC or a managed switch; for heavy media, plan for 2.5/10G before the build.
low
Expansion risk
1 PCIe, 1 M.2, 63 SATA, 0 bays free.Solución: Healthy room for future drives, NICs and accelerators.
low
Upgrade risk
2024 platform — current generation with a forward-looking socket/feature set.Solución: Buy for the workload, not the socket — upgrade paths are a bonus, not a guarantee.
Auditoría final del build
Audit found 4 critical and 0 warning item(s) worth fixing before you buy.
4 Crítico1 Optimización2 Opcional2 Futuro
Crítico
Check the balance
System idles ~32W vs maxIdlePowerW=30W requested (CPU ~10W + drives/fans). Closest efficient option shown — lower the workload or raise the cap for full compliance.Acción: Reconsider the config for the stated workload or budget before buying.balance
Crítico
Check the balance
This build may struggle with the stated workload.Acción: Reconsider the config for the stated workload or budget before buying.balance
Crítico
No storage redundancy
2 drive(s) with no mirror or parity for the data you plan to store.Acción: Add at least a mirror for irreplaceable data before you migrate anything.storage
Crítico
CPU close to the limit
The workload uses 100% of the CPU — little headroom for background tasks or growth.Acción: Consider a stronger CPU or drop a secondary workload.compute
Optimización
Use NAS-rated drives
Desktop drives in an always-on NAS/server role have higher long-run failure rates.Acción: Prefer NAS/CMR-rated drives for 24/7 duty.storage
Opcional
Add a UPS
An always-on server holding data should survive power blips.Acción: Add a line-interactive UPS sized for the build's peak draw (≥ 10 min at typical load for a clean shutdown).power
Opcional
Keep a backup off-box
Redundancy inside the box does not survive fire, theft or a whole-array fault.Acción: Mirror the important data to an external drive, a second box, or cloud.storage
Futuro
RAM expansion available
2 RAM slot(s) free for a later upgrade.Acción: Leave them free until the workload actually grows.memory
Futuro
PCIe slot available
1 free PCIe slot(s) for a NIC, HBA or GPU later.Acción: Use it for a 10G NIC, extra HBA, or an accelerator when the need appears.expansion
Qué se convierte en el límite
Storage nearly full is the most likely thing to date this build within 1-2y.
1-2y
Storage nearly full
Por qué: 75% of raw capacity is already in use — media libraries and backups grow fast.Qué hacer: Expanding is easy: add a drive to the free bays/ports.
1-2y
CPU is the next bottleneck
Por qué: The CPU runs at 100% of capacity — new services or more users will hit the wall first.Qué hacer: Consider a stronger CPU within the same socket generation while it is still cheap.
Lo que te limitará primero
CPU is the closest to its limit (100% of capacity in use) — it will likely force the next upgrade.
- Upgrade network to Edimax EN-9320TX-E 10 Gb/s Ethernet PCIe x4
- Add SURALLOW RX 580 8GB Graphics Card
- Upgrade storage to Seagate IronWolf NAS 8TB HDD 3.5" 7200RPM SATA
- Upgrade cpu to AMD Ryzen 7 5700
Misión
Docker · principal · 2 usuariosHome Assistant · secundario · 1 usuariosBackup · secundario · 1 usuarios
Restricciones- Presupuesto
- —
- Prioridad de energía
- 10/10
- Prioridad de ruido
- 7/10
- Prioridad de expansión
- 4/10
Arquitectura recomendada
diy · mini build on AM4 + AMD B550- Cómputo
- AMD Ryzen 5 5600GT
- Memoria
- G.Skill Ripjaws V DDR4-2133 CL15 32GB (2x16GB)
- Almacenamiento
- Western Digital WD Blue SN5000 4TB SSD M.2-2280 PCIe 4.0 x4 NVMe, Seagate SV35.5 2TB 3.5" HDD 7200RPM SATA 6.0 Gb/s
- Red
- Intel I226T1 2.5 Gb/s Ethernet PCIe x1
- Refrigeración
- Xilence A250PWM Air 69mm Red / Black 49.5 CFM
- Fuente
- SeaSonic Platinum Fanless ATX 400W Fully Modular 80+ Platinum
- Expansión
- 1× PCIe, 1× M.2, 63× SATA, 2× RAM
Sigue explorando
