Bästa Jellyfin-mediaserver for Belgien

En hemmaserver för Jellyfin med hårdvarutranskodning och medialagring. Prices and availability for Belgien.

Behovet

Jellyfin · 2 användare
Transkodning
Fillagring
12 TB användbart · speglad

Översikt · Value build€1,347

Krav vs det här bygget

CPU-trådar	11	79%	OK
RAM	32 GB	100%	Fullt
Lagring	32 TB	87%	Knappt
GPU	Dedikerad

Förbrukning

Användning: 24/7
Tomgång: 57 W
Typisk: 89 W
Topp: 229 W
Energi / år: ≈ €234
Över 3 år: ≈ €702

Poäng

Totalt76

Prestanda87

Effektivitet53

Värde86

Varför den här varianten

Välj den om

The lowest total price (1347€) that still covers this workload properly — best price/quality ratio.

Vad den offrar

No ECC memory — fine for home use, less ideal for bit-rot-sensitive archives.
Expansion headroom is trimmed: parts are chosen for price per capability.

Hur delarna valdes

Intel Core Ultra 5 245K: 14 cores / 14 threads covers the 11 cores needed with headroom.
Motherboard Intel B860 (LGA 1851): matches the CPU socket and case size.
RAM: 32GB DDR5 — meets the 32GB the workload requires.

Varför inte de andra

Value build — most for your money beats "Smart build — best all-round" on performance -5, value +5, efficiency -6, longevity -5 — that is why it is recommended for your priorities.

Innan du köper

Kritisk

Check the balance

This build may struggle with the stated workload.

Kritisk

RAM is nearly exhausted

The workload needs 100% of available RAM — swapping will hurt.

Prestanda87

Värde86

Effektivitet53

Utbyggbarhet69

Tystnad50

Livslängd85

Tillförlitlighet70

Totalt76

Framtidssäkerhetspoäng

Stark framtidssäkerhet

74/100

Strong future-proofing (74/100) — this build should stay relevant for years without major surgery.

Upgrade path75

DIY build — the CPU, motherboard and PSU can each be upgraded independently without replacing the whole system.

Expansion64

Expansion headroom: 2 PCIe slot(s), 1 M.2, 2 SATA, 0 drive bay(s), 2 RAM slot(s) free.

Storage growth70

Storage is 87% utilized with 0 free drive bay(s) and 2 free SATA port(s).

Memory growth75

2 RAM slot(s) free; memory is 100% utilized.

Networking80

Networking is 2500 Mbps, and a free PCIe slot can add a faster NIC later.

Replacement ease90

ATX form factor with standard, socketed components — most parts are easy to replace.

Workload change65

A 4GB GPU is present — AI and transcoding workloads are covered.

Homelab Risk Score

Låg risk

10/100

Low risk (10/100) — sensible redundancy and headroom; no single point of failure is exposed.

low

Single point of failure

Storage has redundancy (mirror) — a single drive failure does not take the array down.Åtgärd: Continue a 3-2-1 backup strategy; redundancy is not a backup.

low

Storage risk

2 NAS-rated hard drive(s) — rated for 24/7 operation.Åtgärd: Keep drives cool and monitor SMART health.

low

Data loss risk

Redundancy protects against drive failure, though it is not a substitute for backups.Åtgärd: Follow a 3-2-1 backup rule: at least one copy off the box.

low

Power risk

PSU is 500W, peak load 229W (46%).Åtgärd: PSU sizing leaves healthy headroom for spikes and future parts.

low

Network risk

Single 2500 Mbps NIC — a switch/port failure takes the box fully offline, and multi-user media can saturate 2500 Mbps.Åtgärd: Consider a second NIC or a managed switch; for heavy media, plan for 2.5/10G before the build.

low

Expansion risk

2 PCIe, 1 M.2, 2 SATA, 0 bays free.Åtgärd: Healthy room for future drives, NICs and accelerators.

low

Upgrade risk

2024 platform — current generation with a forward-looking socket/feature set.Åtgärd: Buy for the workload, not the socket — upgrade paths are a bonus, not a guarantee.

Slutlig byggaudit

Audit found 2 critical and 0 warning item(s) worth fixing before you buy.

2 Kritisk2 Valfritt2 Framtid

Kritisk

Check the balance

This build may struggle with the stated workload.Åtgärd: Reconsider the config for the stated workload or budget before buying.balance

Kritisk

RAM is nearly exhausted

The workload needs 100% of available RAM — swapping will hurt.Åtgärd: Add more RAM now, while slots are still free.memory

Valfritt

Add a UPS

An always-on server holding data should survive power blips.Åtgärd: Add a line-interactive UPS sized for the build's peak draw (≥ 10 min at typical load for a clean shutdown).power

Valfritt

Keep a backup off-box

Redundancy inside the box does not survive fire, theft or a whole-array fault.Åtgärd: Mirror the important data to an external drive, a second box, or cloud.storage

Framtid

RAM expansion available

2 RAM slot(s) free for a later upgrade.Åtgärd: Leave them free until the workload actually grows.memory

Framtid

PCIe slot available

2 free PCIe slot(s) for a NIC, HBA or GPU later.Åtgärd: Use it for a 10G NIC, extra HBA, or an accelerator when the need appears.expansion

Vad som blir gränsen

RAM is tight is the most likely thing to date this build within 1-2y.

1-2y

RAM is tight

Varför: Memory is 100% utilized — a growing workload will hit the ceiling quickly.Vad du ska göra: Add the remaining RAM before prices change, while slots are free.

1-2y

Storage nearly full

Varför: 87% of raw capacity is already in use — media libraries and backups grow fast.Vad du ska göra: Expanding is easy: add a drive to the free bays/ports.

Vidare

Bortom det här bygget

Gemenskap

0 har byggt den · 0 rekommenderar den · 0 bilder

Workloadguiderna bakom detta bygge

Utforska andra byggen

Alla rekommenderade byggen

Bästa Jellyfin-mediaserver for Belgien

Krav vs det här bygget

Förbrukning

Poäng

Varför den här varianten

Innan du köper

Framtidssäkerhetspoäng

Homelab Risk Score

Slutlig byggaudit

Vad som blir gränsen

Vad som begränsar dig först

Uppdrag

Rekommenderad arkitektur

Bortom det här bygget

Gemenskap

Workloadguiderna bakom detta bygge

Utforska andra byggen