Bästa Blender 3D-arbetsstation for Spanien
En GPU-renderingsdator för Blender Cycles/OptiX — VRAM för hela scenen och fart att iterera. Prices and availability for Spanien.
Översikt · Performance build€1,657
Krav vs det här bygget
behov · använt| CPU-trådar | 12 | 60% | OK |
|---|---|---|---|
| RAM | 32 GB | 100% | Fullt |
| Lagring | 2 TB | 100% | Fullt |
| GPU | Dedikerad |
Förbrukning
- Användning
- 24/7
- Tomgång
- 58 W
- Typisk
- 110 W
- Topp
- 315 W
- Energi / år
- ≈ €240
- Över 3 år
- ≈ €720
Poäng
Totalt79
Prestanda88
Effektivitet52
Värde80
Varför den här varianten
Välj den om
CPU headroom: 40% of the requirement is unused — room to grow.
Vad den offrar
- Higher energy draw and price for maximum compute headroom.
Hur delarna valdes
- Intel Core Ultra 7 265: 20 cores / 20 threads covers the 12 cores needed with headroom.
- Motherboard Intel B860 (LGA 1851): matches the CPU socket and case size.
- RAM: 32GB DDR5 — meets the 32GB the workload requires.
Varför inte de andra
- Performance build — maximum capability beats "Smart build — best all-round" on performance +10, expandability -6, longevity +6 — that is why it is recommended for your priorities.
- Performance build — maximum capability beats "Value build — most for your money" on performance +9, efficiency +18, longevity +5 — that is why it is recommended for your priorities.
Innan du köper
3 kritiskaKritisk
Check the balance
This build may struggle with the stated workload.
Kritisk
No storage redundancy
1 drive(s) with no mirror or parity for the data you plan to store.
Kritisk
RAM is nearly exhausted
The workload needs 100% of available RAM — swapping will hurt.
€355
€115
€105
caseKOLINK Inspire K12 ARGB ATX Mid Tower Black Tempered GlassATX/MATX/ITX · 2× 3.5″Alternativ och byte€20
€9
≈ €64
€112
gpuAsus Prime Radeon RX 9070 GRE EVO OC Edition 12GB GDDR612 GB VRAM · 220 W · ROCMAlternativ och byte€877
Tomgång
58W
Typisk
110W
Topp
315W
Energi / år
≈ €240
Prestanda88
Värde80
Effektivitet52
Utbyggbarhet80
Tystnad50
Livslängd88
Tillförlitlighet60
Totalt79
Framtidssäkerhetspoäng
Stark framtidssäkerhet73/100
Strong future-proofing (73/100) — this build should stay relevant for years without major surgery.
Upgrade path75
DIY build — the CPU, motherboard and PSU can each be upgraded independently without replacing the whole system.
Expansion88
Expansion headroom: 2 PCIe slot(s), 4 M.2, 0 SATA, 2 drive bay(s), 0 RAM slot(s) free.
Storage growth70
Storage is 100% utilized with 2 free drive bay(s) and 0 free SATA port(s).
Memory growth20
0 RAM slot(s) free; memory is 100% utilized.
Networking80
Networking is 2500 Mbps, and a free PCIe slot can add a faster NIC later.
Replacement ease90
ATX form factor with standard, socketed components — most parts are easy to replace.
Workload change85
A 12GB GPU is present — AI and transcoding workloads are covered.
Homelab Risk Score
Måttlig risk37/100
Moderate risk (37/100) — a few items are worth fixing before you commit (see checklist).
critical
Single point of failure
All data sits on a single drive with no redundancy — one failure means total loss.Åtgärd: Add at least a mirror (RAID 1/ZFS mirror) for irreplaceable data, or an additional parity drive for larger arrays.
low
Storage risk
Solid-state storage — no moving parts, low mechanical failure risk.Åtgärd: For an always-on system, prefer NAS/CMR-rated drives; monitor SMART and replace before the warranty ends.
high
Data loss risk
1 drive(s) with no redundancy — a single SSD/controller failure can still lose data.Åtgärd: Add redundancy and an off-site/off-box backup for anything irreplaceable.
low
Power risk
PSU is 550W, peak load 315W (57%).Åtgärd: PSU sizing leaves healthy headroom for spikes and future parts.
low
Network risk
Single 2500 Mbps NIC — a switch/port failure takes the box fully offline, and multi-user media can saturate 2500 Mbps.Åtgärd: Consider a second NIC or a managed switch; for heavy media, plan for 2.5/10G before the build.
low
Expansion risk
2 PCIe, 4 M.2, 0 SATA, 2 bays free.Åtgärd: Healthy room for future drives, NICs and accelerators.
low
Upgrade risk
2025 platform — current generation with a forward-looking socket/feature set.Åtgärd: Buy for the workload, not the socket — upgrade paths are a bonus, not a guarantee.
Slutlig byggaudit
Audit found 3 critical and 0 warning item(s) worth fixing before you buy.
3 Kritisk1 Valfritt2 Framtid
Kritisk
Check the balance
This build may struggle with the stated workload.Åtgärd: Reconsider the config for the stated workload or budget before buying.balance
Kritisk
No storage redundancy
1 drive(s) with no mirror or parity for the data you plan to store.Åtgärd: Add at least a mirror for irreplaceable data before you migrate anything.storage
Kritisk
RAM is nearly exhausted
The workload needs 100% of available RAM — swapping will hurt.Åtgärd: Add more RAM now, while slots are still free.memory
Valfritt
Keep a backup off-box
Redundancy inside the box does not survive fire, theft or a whole-array fault.Åtgärd: Mirror the important data to an external drive, a second box, or cloud.storage
Framtid
Drive bays remain
2 drive bay(s) free for future capacity.Åtgärd: Expand capacity in pairs (mirror/parity) when needed.storage
Framtid
PCIe slot available
2 free PCIe slot(s) for a NIC, HBA or GPU later.Åtgärd: Use it for a 10G NIC, extra HBA, or an accelerator when the need appears.expansion
Vad som blir gränsen
RAM is maxed out is the most likely thing to date this build within 1-2y.
1-2y
RAM is maxed out
Varför: All RAM slots are used and the workload already sits at 100% — the next memory need means replacing kits or a new build.Vad du ska göra: Buy a single larger kit now, or plan the RAM for the full lifecycle.
1-2y
Storage nearly full
Varför: 100% of raw capacity is already in use — media libraries and backups grow fast.Vad du ska göra: Expanding is easy: add a drive to the free bays/ports.
Vad som begränsar dig först
RAM is the closest to its limit (100% of capacity in use) — it will likely force the next upgrade.
- Add Microconnect MC-PCIEX4-X520-DA1 network card Internal Fiber 10000 Mbit/s
- Add Western Digital Blue SN550 2TB SSD M.2 PCIe 3.0 X4 NVMe
- Upgrade gpu to ASUS PRIME GeForce RTX 5060 Ti 16GB GDDR7 OC DDR7
Uppdrag
3D rendering · primär · 1 användare
Begränsningar- Budget
- —
- Energiprioritet
- 3/10
- Bullerprioritet
- 2/10
- Utbyggnadsprioritet
- 5/10
Rekommenderad arkitektur
diy · tower build on LGA 1851 + Intel B860- Beräkning
- Intel Core Ultra 7 265
- Minne
- Acer HT200 32GB (2 x 16 GB) DDR5 6000 CL30 Black
- Lagring
- Western Digital Blue SN550 2TB SSD M.2 PCIe 3.0 X4 NVMe
- Nätverk
- 2.5G onboard
- Kylning
- ARCTIC Alpine 17 CO Air 77mm Black
- Strömförsörjning
- be quiet! Straight Power 11 550W Fully Modular 80+ Gold
- Utbyggnad
- 2× PCIe, 4× M.2, 2 bay
Vidare
