Beste Blender 3D-workstation

Een GPU-renderdesktop voor Blender Cycles/OptiX — VRAM voor de hele scène en snelheid om te itereren.

De aanvraag

3D-rendering
Budget €2,000

Overzicht · Long-term build€1,690

Eisen vs deze build

CPU-threads	12	50%	OK
RAM	32 GB	100%	Vol
Opslag	2 TB	2%	OK
GPU	Dedicated

Verbruik

Gebruik: 24/7
Inactief: 72 W
Typisch: 136 W
Piek: 405 W
Energie / jaar: ≈ €299
Over 3 jaar: ≈ €897

Score

Totaal87

Prestaties80

Efficiëntie40

Waarde87

Waarom deze variant

Kies deze als

2 free drive bay(s), 2 free PCIe slot(s) and 2 free RAM slot(s) keep the upgrade path open for years.

Wat het opoffert

Higher upfront cost today — you pay for expansion capacity before you need it.

Hoe de onderdelen zijn gekozen

Intel Core i9-14900KF: 24 cores / 32 threads covers the 12 cores needed with headroom.
Motherboard Intel B760 (LGA 1700): matches the CPU socket and case size.
RAM: 32GB DDR5,DDR4 — meets the 32GB the workload requires.

Waarom niet de andere

Long-term build — expandable & future-proof beats "Smart build — best all-round" on expandability +14 — that is why it is recommended for your priorities.

Voor je koopt

Kritiek

Check the balance

This build may struggle with the stated workload.

Kritiek

No storage redundancy

1 drive(s) with no mirror or parity for the data you plan to store.

Kritiek

RAM is nearly exhausted

The workload needs 100% of available RAM — swapping will hurt.

Prestaties80

Waarde87

Efficiëntie40

Uitbreidbaarheid100

Stilte50

Levensduur98

Betrouwbaarheid60

Algemeen87

Toekomstbestendigheidsscore

Sterke toekomstbestendigheid

84/100

Strong future-proofing (84/100) — this build should stay relevant for years without major surgery.

Upgrade path75

DIY build — the CPU, motherboard and PSU can each be upgraded independently without replacing the whole system.

Expansion92

Expansion headroom: 2 PCIe slot(s), 1 M.2, 4 SATA, 2 drive bay(s), 2 RAM slot(s) free.

Storage growth90

Storage is 2% utilized with 2 free drive bay(s) and 4 free SATA port(s).

Memory growth75

2 RAM slot(s) free; memory is 100% utilized.

Networking80

Networking is 2500 Mbps, and a free PCIe slot can add a faster NIC later.

Replacement ease90

ATX form factor with standard, socketed components — most parts are easy to replace.

Workload change85

A 12GB GPU is present — AI and transcoding workloads are covered.

Homelab Risk Score

Gematigd risico

37/100

Moderate risk (37/100) — a few items are worth fixing before you commit (see checklist).

critical

Single point of failure

All data sits on a single drive with no redundancy — one failure means total loss.Oplossing: Add at least a mirror (RAID 1/ZFS mirror) for irreplaceable data, or an additional parity drive for larger arrays.

low

Storage risk

Solid-state storage — no moving parts, low mechanical failure risk.Oplossing: For an always-on system, prefer NAS/CMR-rated drives; monitor SMART and replace before the warranty ends.

high

Data loss risk

1 drive(s) with no redundancy — a single SSD/controller failure can still lose data.Oplossing: Add redundancy and an off-site/off-box backup for anything irreplaceable.

low

Power risk

PSU is 750W, peak load 405W (54%).Oplossing: PSU sizing leaves healthy headroom for spikes and future parts.

low

Network risk

Single 2500 Mbps NIC — a switch/port failure takes the box fully offline, and multi-user media can saturate 2500 Mbps.Oplossing: Consider a second NIC or a managed switch; for heavy media, plan for 2.5/10G before the build.

low

Expansion risk

2 PCIe, 1 M.2, 4 SATA, 2 bays free.Oplossing: Healthy room for future drives, NICs and accelerators.

low

Upgrade risk

2023 platform — current generation with a forward-looking socket/feature set.Oplossing: Buy for the workload, not the socket — upgrade paths are a bonus, not a guarantee.

Laatste build-audit

Audit found 3 critical and 0 warning item(s) worth fixing before you buy.

3 Kritiek1 Optioneel3 Toekomst

Kritiek

Check the balance

This build may struggle with the stated workload.Actie: Reconsider the config for the stated workload or budget before buying.balance

Kritiek

No storage redundancy

1 drive(s) with no mirror or parity for the data you plan to store.Actie: Add at least a mirror for irreplaceable data before you migrate anything.storage

Kritiek

RAM is nearly exhausted

The workload needs 100% of available RAM — swapping will hurt.Actie: Add more RAM now, while slots are still free.memory

Optioneel

Keep a backup off-box

Redundancy inside the box does not survive fire, theft or a whole-array fault.Actie: Mirror the important data to an external drive, a second box, or cloud.storage

Toekomst

RAM expansion available

2 RAM slot(s) free for a later upgrade.Actie: Leave them free until the workload actually grows.memory

Toekomst

Drive bays remain

2 drive bay(s) free for future capacity.Actie: Expand capacity in pairs (mirror/parity) when needed.storage

Toekomst

PCIe slot available

2 free PCIe slot(s) for a NIC, HBA or GPU later.Actie: Use it for a 10G NIC, extra HBA, or an accelerator when the need appears.expansion

Wat de limiet wordt

RAM is tight is the most likely thing to date this build within 1-2y.

1-2y

RAM is tight

Waarom: Memory is 100% utilized — a growing workload will hit the ceiling quickly.Wat te doen: Add the remaining RAM before prices change, while slots are free.

Verder

Voorbij deze build

Community

0 hebben 'm gebouwd · 0 raden 'm aan · 0 foto's

Open de build-pagina

Workloadgidsen achter deze build

3D-rendering

Ontdek andere builds

Alle aanbevolen builds

Beste Blender 3D-workstation

Eisen vs deze build

Verbruik

Score

Waarom deze variant

Voor je koopt

Toekomstbestendigheidsscore

Homelab Risk Score

Laatste build-audit

Wat de limiet wordt

Wat je als eerste beperkt

Missie

Aanbevolen architectuur

Voorbij deze build

Community

Workloadgidsen achter deze build

Ontdek andere builds