Bedste Jellyfin-mediaserver for Belgien

En hjemmeserver til Jellyfin med hardwaretranskodning og medieopbevaring. Prices and availability for Belgien.

Behovet

Jellyfin · 2 brugere
Transkodning
Fillagring
12 TB brugbart · spejlet

Oversigt · Value build€1,347

Krav vs dette byg

CPU-tråde	11	79%	OK
RAM	32 GB	100%	Fuld
Lager	32 TB	87%	Knap
GPU	Dedikeret

Forbrug

Brug: 24/7
Tomgang: 57 W
Typisk: 89 W
Spids: 229 W
Energi / år: ≈ €234
Over 3 år: ≈ €702

Score

Samlet76

Ydelse87

Effektivitet53

Værdi86

Hvorfor denne variant

Vælg den, hvis

The lowest total price (1347€) that still covers this workload properly — best price/quality ratio.

Hvad den ofrer

No ECC memory — fine for home use, less ideal for bit-rot-sensitive archives.
Expansion headroom is trimmed: parts are chosen for price per capability.

Hvordan delene blev valgt

Intel Core Ultra 5 245K: 14 cores / 14 threads covers the 11 cores needed with headroom.
Motherboard Intel B860 (LGA 1851): matches the CPU socket and case size.
RAM: 32GB DDR5 — meets the 32GB the workload requires.

Hvorfor ikke de andre

Value build — most for your money beats "Smart build — best all-round" on performance -5, value +5, efficiency -6, longevity -5 — that is why it is recommended for your priorities.

Før du køber

Kritisk

Check the balance

This build may struggle with the stated workload.

Kritisk

RAM is nearly exhausted

The workload needs 100% of available RAM — swapping will hurt.

Ydeevne87

Værdi86

Effektivitet53

Udvidelsesmuligheder69

Støj50

Levetid85

Pålidelighed70

Samlet76

Fremtidssikkerhedsscore

Stærk fremtidssikkerhed

74/100

Strong future-proofing (74/100) — this build should stay relevant for years without major surgery.

Upgrade path75

DIY build — the CPU, motherboard and PSU can each be upgraded independently without replacing the whole system.

Expansion64

Expansion headroom: 2 PCIe slot(s), 1 M.2, 2 SATA, 0 drive bay(s), 2 RAM slot(s) free.

Storage growth70

Storage is 87% utilized with 0 free drive bay(s) and 2 free SATA port(s).

Memory growth75

2 RAM slot(s) free; memory is 100% utilized.

Networking80

Networking is 2500 Mbps, and a free PCIe slot can add a faster NIC later.

Replacement ease90

ATX form factor with standard, socketed components — most parts are easy to replace.

Workload change65

A 4GB GPU is present — AI and transcoding workloads are covered.

Homelab Risk Score

Lav risiko

10/100

Low risk (10/100) — sensible redundancy and headroom; no single point of failure is exposed.

low

Single point of failure

Storage has redundancy (mirror) — a single drive failure does not take the array down.Løsning: Continue a 3-2-1 backup strategy; redundancy is not a backup.

low

Storage risk

2 NAS-rated hard drive(s) — rated for 24/7 operation.Løsning: Keep drives cool and monitor SMART health.

low

Data loss risk

Redundancy protects against drive failure, though it is not a substitute for backups.Løsning: Follow a 3-2-1 backup rule: at least one copy off the box.

low

Power risk

PSU is 500W, peak load 229W (46%).Løsning: PSU sizing leaves healthy headroom for spikes and future parts.

low

Network risk

Single 2500 Mbps NIC — a switch/port failure takes the box fully offline, and multi-user media can saturate 2500 Mbps.Løsning: Consider a second NIC or a managed switch; for heavy media, plan for 2.5/10G before the build.

low

Expansion risk

2 PCIe, 1 M.2, 2 SATA, 0 bays free.Løsning: Healthy room for future drives, NICs and accelerators.

low

Upgrade risk

2024 platform — current generation with a forward-looking socket/feature set.Løsning: Buy for the workload, not the socket — upgrade paths are a bonus, not a guarantee.

Endelig build-audit

Audit found 2 critical and 0 warning item(s) worth fixing before you buy.

2 Kritisk2 Valgfrit2 Fremtid

Kritisk

Check the balance

This build may struggle with the stated workload.Handling: Reconsider the config for the stated workload or budget before buying.balance

Kritisk

RAM is nearly exhausted

The workload needs 100% of available RAM — swapping will hurt.Handling: Add more RAM now, while slots are still free.memory

Valgfrit

Add a UPS

An always-on server holding data should survive power blips.Handling: Add a line-interactive UPS sized for the build's peak draw (≥ 10 min at typical load for a clean shutdown).power

Valgfrit

Keep a backup off-box

Redundancy inside the box does not survive fire, theft or a whole-array fault.Handling: Mirror the important data to an external drive, a second box, or cloud.storage

Fremtid

RAM expansion available

2 RAM slot(s) free for a later upgrade.Handling: Leave them free until the workload actually grows.memory

Fremtid

PCIe slot available

2 free PCIe slot(s) for a NIC, HBA or GPU later.Handling: Use it for a 10G NIC, extra HBA, or an accelerator when the need appears.expansion

Hvad bliver grænsen

RAM is tight is the most likely thing to date this build within 1-2y.

1-2y

RAM is tight

Hvorfor: Memory is 100% utilized — a growing workload will hit the ceiling quickly.Hvad du skal gøre: Add the remaining RAM before prices change, while slots are free.

1-2y

Storage nearly full

Hvorfor: 87% of raw capacity is already in use — media libraries and backups grow fast.Hvad du skal gøre: Expanding is easy: add a drive to the free bays/ports.

Videre

Ud over dette byg

Fællesskab

0 har bygget den · 0 anbefaler den · 0 fotos

Workloadguiderne bag dette build

Udforsk andre builds

Alle anbefalede builds

Bedste Jellyfin-mediaserver for Belgien

Krav vs dette byg

Forbrug

Score

Hvorfor denne variant

Før du køber

Fremtidssikkerhedsscore

Homelab Risk Score

Endelig build-audit

Hvad bliver grænsen

Hvad der begrænser dig først

Mission

Anbefalet arkitektur

Ud over dette byg

Fællesskab

Workloadguiderne bag dette build

Udforsk andre builds